Model W08 (pen clip model) Light bulb XTE main light + 9*LED side lights (5*LED white light + 2*LED yellow light + 2*LED red light) Product size/net weight 17.5*2*1.8CM 48G Box size/gross weight 7.5*2.5*25CM 122G Material ABS Switch Press the switch Battery Built-in 400mAh 14500 battery Charging time/battery life Charging time: 1 hour Battery life: 1.5-4 hours Charging method Type-C USB charging Gear position Six modes: Main light strong light - Main light weak light - Side light 5*LED white light - 2*LED yellow light - 2*LED red light on 2*LED red light flashes at any setting and stays on for 8 seconds; press again to turn off. Press and hold at any setting to turn off Zoom mode Fixed focus Waterproof rating IPX4 Lumen/Range 100-200LM 200-300m Features Digital display, magnetic attachment, exquisite and compact, easy to carry, multiple light sources, with pen clip Indicator light Digital percentage battery indicator, flashes green lightning when charging Color specifications Gray/Dark Green The package contains Flashlight + USB cable + color box 120PCS/piece, box dimensions: 48*41*28.5cm, gross/net weight: 11/10kgs 1. Instructions for use 1. Check the battery: Ensure the battery has power and is installed in the correct direction in the flashlight 2. When using a flashlight, choose the battery according to the flashlight's voltage and battery requirements. Do not use the wrong battery to avoid damaging the circuit board. Do not use batteries of different models and voltages simultaneously 3. During use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent over-discharging of the battery and recharge it promptly. Pay attention to the battery's waterproof, moisture-proof, and drop-proof features. When charging, according to the charger's charging speed, remove the battery in time after the indicator light changes, and do not overcharge 4. Batteries that are not used for a long time should be fully charged and kept in that state. It is recommended to recharge and discharge them again approximately every three months to avoid chemical corrosion 5. Keep the inner wall of the lamp cup clean; absolutely do not wipe it with your hands or hard objects. To remove fingerprints from the lens, use a cotton swab dipped in lens cleaner and gently wipe it 6. Do not expose the flashlight to sunlight, water, chemicals, or corrosive gases for extended periods to avoid damage to the flashlight 7. Non-professionals should not disassemble the flashlight to avoid damaging the circuit board. 2. Precautions: 1. Do not shine light directly into the eyes to avoid causing damage to them 2. Please do not use it with excessive voltage; the voltage should not exceed 4.2V. Do not place the battery upside down, otherwise the circuit board will be damaged 3. When charging, please pay attention to the positive and negative poles of the charger and avoid overcharging or over-discharging the battery to prevent damage to its lifespan (charging time is generally 5-8 hours) 4. When using the flashlight, check that all the screws are tightly tightened and not loose, otherwise it may result in the flashlight not lighting up or only lighting up dimly 5. The flashlight should be kept away from sunlight or high-temperature environments. After stopping use, please remove the battery, charge it fully, and store it in a cool, dry place 6. The company's flashlight has the ability to withstand water splashes in daily life and generally won't have any issues in the rain, but it is not suitable for submersion This flashlight is not designed for underwater use, please do not take it diving or leave it in a basin or bathtub for a long time 7. To maintain the smooth rotation of the O-ring (sealing rubber ring) and threads, please apply petroleum jelly oil or similar substance to their surface 2-3 times a year. 3. Charging instructions: Insufficient power should be replenished promptly to avoid affecting the battery's lifespan, and the battery should also be charged during long-term storage.