Full Face MTB Helmets: When You Need One and How to Choose

A full face helmet is not a better version of a trail helmet. It is a different piece of equipment, built for a different kind of crash — one where your chin, jaw and teeth meet the ground at speed. Buying one is a decision about what you ride, not about how much protection you can afford.
This guide covers which riding actually justifies a full face, how downhill and enduro designs differ, what the safety standards mean, how to get the fit right, and the one thing most riders get wrong: when to throw a helmet away.
In this guide
When a full face is the right call
Face and jaw injuries make up a large share of serious mountain bike trauma, and almost all of them happen in the same conditions: speed, gravity and obstacles. If your riding includes lift-served downhill, bike park laps, steep technical descents or jumps, a full face is the sensible default.
If you ride cross-country, gravel and gentle trail centre loops, a well-fitted trail helmet with a visor is the better choice — lighter, cooler, and far more comfortable to pedal in. Wearing a full face for a two-hour climb does not make you safer; it makes you more likely to take the helmet off.
Downhill, enduro and convertible designs
| Type | Built for | Trade-off |
|---|---|---|
| Downhill (DH) | Lift-access, bike parks, race runs | Heavy, hot, poor to pedal in |
| Enduro full face | Pedal-up, descend hard | Less ventilation than a trail lid; still hot on long climbs |
| Convertible (removable chin bar) | Mixed riding, one helmet for everything | Heavier than a trail helmet even with the bar removed |
| Lightweight full face | Aggressive trail, e-bike | Weaker chin bar than a DH shell |
An enduro full face is the compromise most riders end up with: enough shell to protect the jaw, enough ventilation to survive a climb. A convertible design is genuinely useful if you only own one helmet, but it is master of neither job.
Standards and what they test
Look for EN 1078 for general bicycle helmets. Downhill-specific shells are also tested to ASTM F1952, which includes a chin bar impact test that EN 1078 does not require — this is the difference between a full face that protects your jaw and one that only looks like it does.
Rotational impact protection is a separate feature, usually sold as MIPS, SPIN or a similar system. It is designed to reduce the twisting force that causes concussion. It is worth having, but it does not replace fit: a badly fitting helmet with rotational protection is still a badly fitting helmet.
RoSPA publishes general cycle safety guidance, and the Highway Code rules for cyclists set out your legal obligations on the road — relevant if your ride starts and ends on tarmac.

Fit, cheek pads and vision
A full face must fit tighter than a trail helmet, because the chin bar has to stay in front of your jaw in a crash. Cheek pads should press your face slightly — that pressure is what holds the helmet in place.
- Measure your head at the widest point and start from the size chart, then adjust with the pad sets most brands include.
- The chin bar should sit clear of your chin when your mouth is closed, with roughly a finger's width of clearance.
- Check vision. The opening should let you see your front wheel and the trail ahead without tilting your head down.
- Shake test. With the strap done up, the helmet should move your skin, not slide over it.
- Try it with your goggles. Some shells simply do not fit some goggle frames, and you only find out on the hill.
Weight, heat and climbing
Full face helmets run from roughly 700 g for a lightweight enduro shell to well over 1,100 g for a DH model. On a lift-served day that weight is irrelevant. On a ride with 600 m of climbing it is the difference between a good day and a bad one.
Heat is the more serious issue. A full face traps air around the face, and overheating leads to poor decisions on descents. If you run hot, prioritise ventilation over the absolute lightest shell.
Goggles, glasses and compatibility
Most full face riders use goggles: they seal against the face, keep mud and dust out, and stay put in a crash. Glasses under a full face work, but they fog faster and can be pushed into your face by the chin bar.
- Match goggle frame to helmet opening. A large frame on a narrow opening pushes the goggle up your forehead.
- Choose lens tint for the trees. Flat light in woodland is where clear or contrast lenses earn their money.
- Carry a spare lens, not a spare goggle. Lenses are small and swapping one takes seconds.
- Check the strap path. It should run outside the shell at the back, not inside it.

Crash damage and replacement
A helmet that has taken a hard hit is finished, even if it looks fine. The foam that absorbs impact does not recover its structure, and a crash-damaged shell can fail on the next impact at a much lower force.
- Replace after any impact that dents, cracks or compresses the shell or liner.
- Replace after a crash where you hit your head hard, even if the helmet shows no visible damage.
- Replace on age. Most manufacturers recommend replacement every three to five years, because sweat and UV degrade the foam and adhesives.
- Never buy a used full face. You cannot see the foam condition, and the previous owner's crash history is exactly the thing that matters.
Complete the kit
A full face only protects the head. Knee and elbow pads matter just as much on the same terrain, and gloves stop the palms taking the first hit. For the ride either side of the descent, a pair of zip-off walking trousers is a practical way to cover the climb and the drive home. The outdoor accessories range covers the rest of the protection and layering basics.
FAQ
Do I need a full face for trail riding?
Only if your trail riding includes steep descents, jumps or bike park features. For general trail centre riding, a good trail helmet is lighter, cooler and more practical.
Is a cheap full face safe?
If it meets EN 1078 and, ideally, ASTM F1952, it is safe. What you pay more for is weight, ventilation, fit adjustment and rotational impact protection.
Can I wear glasses with a full face helmet?
Yes, but they fog faster and can be pressed against your face. Goggles with a prescription insert are the usual solution for riders who need correction.
How do I know if my full face fits?
The cheek pads should press your face slightly, the chin bar should clear your chin, and shaking your head should move your skin with the helmet.
Can I use a downhill helmet for enduro?
You can, but you will overheat and suffer on climbs. An enduro-specific shell is the better compromise unless your riding is entirely lift-served.
Sources
- RoSPA, Accident prevention and cycle safety guidance — head injury risk and helmet use.
- GOV.UK, The Highway Code: rules for cyclists — legal requirements for riding on the road.